LAMTEC Servomotor
- Running time 60 seconds on 90°
- Control voltage 230 VAC / 50 Hz, three-point-step
- 2 Limit switches for limitation of operating displacements to 90° (factory-installed)
- 1 Potentiometer NOVOTEC, 5 kΩ as position feedback
- Electrical manual operation OPEN/CLOSE via push-button
- Protection type IP54
Model:- Servomotor 20 Nm, Type 662R2111 / Servomotor 6 Nm, Type 662R2127
Description
Model:- Servomotor 20Nm, Type 662R2111
Technical Data:
| Parameter | Type 662R2111 as “standard” |
| Output shaft [mm] | Ø12 x 30 mm, parallel key 4 x 4 x 14 mm |
| Voltage [V] | 230 VAC / 50 Hz |
| Running time | 60 s |
| Rotation angle | 90° |
| Control | TPS |
| Protection type | IP54 |
| Electrical manual operation | OPEN / CLOSE-controlling via internal push-buttons |
| Permitted ambient temperature | -20…+60°C |
| additional switch | 1 additional switch for free setting |
Purpose:
Driving butterfly valves in your combustion applications, LAMTEC offers motors for electronic fuel/air ratio controls, operating- and safety-approved, following the slogan „Combustion technology – a one-stop shop“.
Of course, our motors fulfill safety-related requirements according to the use of potentiometers and their form-fitted and free-from-float connection. 4 types of standard motors are available on stock at LAMTEC: 6Nm, 20Nm, 30mN und 40Nm, all at 60 seconds running time.
Additionally, we can offer motors up to 200 Nm with different equipment of limit switches and potentiometers as well as different running times.
Our motors are to be used exclusively for driving actuators in combustion applications with LAMTEC combustion- and fuel/air ratio management systems, Types ETAMATIC, FMS or VMS
Model:- Servomotor 6 Nm, Type 662R2127
Technical Data:
| Parameter | Type 662R2127 in variant “Standard” |
| Output shaft | Ø10 x 25 mm, parallel key 3 x 3 x 8 mm |
| Voltage | 230 VAC / 50 Hz |
| Running time | 60 s |
| Angle of rotation default | 90° |
| Controlling | TPS |
| Protection type | IP54 |
| Electrical manual operation | OPEN / CLOSE-controlling via internal push-buttons |
| Permitted ambient temperature | -20…+60°C |
| additional switch | Without additional switches |
Purpose
In line with its “one-stop-shop” motto, LAMTEC also offers motors for driving the flaps and valves on your combustion plants. The motors, designed for interconnection with electronic systems, have been tested in industrial applications and carry safety approval.
It goes without saying that these motors comply with the safety requirements for the use and positive connection of tested potentiometers, as well as the principal criterion for precise electronic interconnection: zero-float feedback connection.
There are four types of standard motor available straight from LAMTEC stores: the 6 Nm, 20 Nm, 30Nm and 60 Nm, all with a 60 sec. operating time.
Apart from these three standard models, we can also supply motors of up to 200 Nm equipped with different limit switches and potentiometers, and with different operating times.
Furthermore we offer linear and non linear Gas control valve with a nominal diameter between DN25 and DN200. These valves are installed with positive locking at the motors.
These motors are only released for activation of the actuators of combustion applications in combination with LAMTEC Combustion- and Compound Management-Systems type ETAMATIC, FMS or VMS.
Reviews
There are no reviews yet.